Cleaning Your Razorblades
Razorpit sharpens your razor blades by removing excess oils, skin and other residues left on the fine edge of the blade after every shave. It is these difficult-to-remove residues that make the blade feel dull. Friction against the patented Razorpit silicone surface takes this hard-to-remove residue off the fine edge of the blade, and leaves the razor sharp for your next shave.
1. To clean your razor, apply a layer of shaving foam on the
horizontal surface mat of Razorpit.
2. Press the blade of the razor itself down with a constant
pressure onto the mat. Push the razor along the mat against the
shaving direction while maintaining downward pressure. This
will ensure contact between the mat and the razor blades,
thereby cleansing the dirt and residue from the edges. Push the
razor over the mat 3 or 4 times.
3. Rinse both Razorpit and razor under running water, and
place the razor in the Razorpit.